This Remote pan-tilt controller system is mainly used in movie and
TV industry, It can also be used for in monitoring unmanned
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 300 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union,bank cardContact Supplier
Packaging Detail: carton with foam inside
Delivery Detail: 25days
This Remote pan-tilt controller system is mainly used in movie and TV industry, It can also be used for in monitoring unmanned places of high temperature and radiation.
Input voltage: 12V -15V, if needed, we can also make 24V version.
Output current: ≥4A( The power consumption itself is less than0.1A)
Simplex generator output: PWM 2A(MAX)
Over current production: Simplex 2A
1) The joystick is used to control the 2 motors to
make the camera turn to any direction you want.
2) The TILT SPEED RANGE and PAN SPEED
RANGE is to adjust the maximum revolution of
3) The TILT CENTER and PAN CENTER are to
adjust the center of the joystick on each direction,
normally the voltage of the center joystick is
4) The TILT TORQUE and PAN TORQUE is to
add the torsion force on each direction.
5) The START RAMP is to adjust the delay time
when the motor starts. STOP RAMP is to adjust
the delay time when the motor stops. The range is
from 0~2 second which is continuously variable.
6) The TILT SHIFT and PAN SHIFT are used in
changing the rotational direction of each motor. If
you change this switch when pulling the
JOYSTICK, the direction won’t be changed
immediately until the JOYSTICK returns it’s position and you pull it again.
7) The GREEN LED means the power is in normal status, RED LED means abnormal(please
refer to the LED instruction sheet)
26x8x7 cm 1000 g