repair machine for laptop batteries can test and charge laptop battery
1 test
2 charge
3 communication with PC
Port: Shenzhen
Minimum Order Quantity: 1 Set/Sets It all denpends
Supply Ability: 5000 Set/Sets per Month It all denpends
Payment Terms: L/C,T/T,Western Union,paypal
Contact SupplierPackaging Detail: Natural Packing:Box
Delivery Detail: 3~10 working days
repair machine for laptop batteries can test and charge laptop battery
RFNT2 is a battery testing device with two channels, having the features below:
Dimensions: 201 x 99 x 35 mm
Weight: 333g
Adapter Input: AC 100 ~ 240 V Output: DC 19V 4.74A
Display mode
Segment LCD with white backlight + LED in red and green
Charging mode
Constant current + constant voltage
Charging current
Maximum charging current of each channel: 2.5A
Standby power consumption≤1W
Two channels can work independently and serve two intelligent batteries separately. Active, pre-charge, constant current and constant voltage are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries.
Testing time is 30seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.
Normal: Test OK Shown on LCD
Abnormal: Test NG Shown on LCD
Possible causes and solutions for the abnormal:
1) Cause: battery voltage is too low to discharge
Solution: try to charge the battery to raise voltage
2) Cause: remaining capacity is too full to charge any more
Solution: try to discharge the battery to reduce the remaining capacity
3) Bad contact of battery connecting wires
4) Damaged battery
5) Tester trouble
Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.
Battery information can be monitored via three windows.
Battery bar and brief information can be read on home screen.
Show smart battery data in real time and the data can be saved and printed in image format.
Voltage, current and capacity are traced in curves.
Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands.
Users can set working parameters via set parameter window in Battery Manager.
When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery.
Battery information can be read from battery management chip after establishing communication.
Against over-current, over-voltage, over-charge, over-heat and short circuit.
1).1 x adapter
2). 1 x USB cord
3). 1 x CD
4). 13 x connectors
5). 10 x cables
6). 10 x jumpers