12V 10A universal smart car battery charger
Full automatic MCU control
Ruggedized&heavy duty design
Port: Nanjing
Minimum Order Quantity: 200 Piece/Pieces lead acid battery charger sample provided
Supply Ability: 15000 Piece/Pieces per Month sample provided
Payment Terms: T/T,Western Union,MoneyGram,Paypal
Contact SupplierPackaging Detail: Carton L:24cm W:12cm H:6.5cm
Delivery Detail: 3 days after payment
UltiPower 12V 10A universal smart lead acid car battery charger
Feature
Switchmode Technology
Using the latest technology in battery chargers, switchmode chargers convert 240VAC power to 12VDC
power using electronic components, unlike traditional battery chargers that rely on large heavy transformers.
This allows the charger to be lightweight and compact without sacrificing performance.
L.E.DRealtime battery voltage Display
A volt meter determines the battery charge level while the Amp meter displays how much power is being
delivered into the battery.
Intelligent current control, the latest pulse charge technology enables the current "keep changing" due to the battery voltage and its internal temperature, which is the most important consideration in managing the charge cycle . The digital display pulse charger will constantly
Monitoring battery temperature and voltage, thus control the charging cycle and current. Enabling the best current acceptance during any charging stage.
Avoid battery over charged by maintanece charge intruduced.
JLSTAR Pulse Charger works to prevent sulfation buildup by removing the sulfate deposits from the battery plates through a unique Ion Transfer process. The lead sulfates then return to the battery acid as active electrolyte. When connected on a regular basis, our battery maintenance systems will also keep the sulfates from building up again.
Electrical Parame
Item | Parameters | Description |
Input voltage and Frequency | AC95V~AC260V | Frequency50HZ-60HZ |
Input current | <1.5A | Test Conditions Minimum input voltage, output for full load |
Input protection | 5.0A 250VResistance | Damage in the event of fault conditions will be blown resistor |
Work efficiency | 87% | Test ConditionsRated input voltage and full load output |
No-load output voltage | 55.5±0.5V | Not access the battery and any other load |
Output average current(Constant current | 10A±0.15A | When the ambient temperature 250C,(Attention At the beginning of charge state ,the charge current can up to more than 4.7A in the transient time .) |
Conversion Current (Turnlamp current) | 1.3±0.2A | |
Charge limit voltage Constant | 12V±0.3V | Ambient temperature 250C(With temperature compensation, with temperature changes) |
Charge to maintain voltage Float | Ambient temperature 250C | |
Pulse time of occurrence | After entering the maintenace charing cycle | According to automatically adjust the degree of cell polarization pulse time, no class variable |
Short-circuit protection
Case of output short circuit protection of power supply will enter a status, and failure to lift automatically resume normal.
Polarity protection.
Prevents the output leads from sparking due to accidental reverse connection or short circuit,
increasing safety.