1. 2x462w@4 ohms Professional Amplifier
2. Reliable Professional Powered Amplifier
3. CE&RoHs Certification PA Amplifier
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 200 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Dual Carton
Delivery Detail: 7 days
1. 2x462w@4 ohms Professional Amplifier
2. Reliable Professional Powered Amplifier
3. CE&RoHs Certification PA Amplifier
F600 Power Amplifier | |
8ΩStereo Power(RMS) | 2×300W |
4ΩStereo Power(RMS) | 2×462W |
8ΩBridged Power(RMS) | 968W |
Frequency Response(+o/-0.3dB,1W/8Ω | 20Hz-20kHz,-3dB@135kHz |
Power Bandwidth(rated power at 4Ω 1%THD+N) | 20Hz-20kHz, -.1.1dB/+0dB |
TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input |
THD+N (1kHz 1W ) | <0.05% |
SMPTE IMD (rated power. 60 Hz & 7kHz) | <0.01% |
Damping Factor ( 1KHz) | 250 |
Input CMRR (1kHz) | >-60dB |
Voltage Gain (rated power @ 8Ω) | X35dB |
Input Sensitivity (rated power at 8Ω) | 0.97V |
Input Impedance (balanced/unbalanced) | 20KΩ/10KΩ |
S/N Ratio ("A"weighted, full power at 4Ω) | 99dB |
Crosstalk ("A"weighted, full power@4Ω) | >-63dB |
Class | 3 Step H |
Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
Supply Power | 1320W |
Power Supply (factory configured) | AC220V/230V,50-60Hz |
Cooling | Two side panel variable speed DC fans, better than conventional cooling |
Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
LED Indicators (per channel) | Signal, Protect, Active, Critical |
Construction | Steel chassis, 16 gauge . Casting Aluminum front panel. |
Dimensions (H×W×D) | 88×483×480mm (2U) |
Net Weight | 19.2kg |
Gross Weight | 23kg |