Professional PC/Network Recording Microphone
Model NO:PC-K4000
Usage:
PC Recording,Network KTV,Audio Recording and Production etc.
Features:
- Good voice pickup function with high sensitivity output
- Inlayed high quality filter sponge which can filter kinds noise caused by wind or dental effectively
- Adopt 48V Phantom power supply mode
- Low Output impedance which can match with sound card more effectively to achieve the best recording effects
- The voice frequency circuit was well designed based on nature,soft,mellow and fill voice
- Champagne Gold color will give you a new brand visual perception
- Suitable for Network KTV,Personal Computer Recording and Musical Instrument Recording etc.
Performance Parameter:
Cartridge | Condenser Cartridge |
Frequency response | 30Hz-20KHz |
Sensitivity | -36db±3db(0db=1V/Pa at 1KHz) |
Directivity | Cardioid |
Output Impedance | ≥1000Ω |
Power Supply Mode | 48V Phantom Power Supply |
Equivalent Noise Level | ≤22dbA(IEC 581-5) |
Max Input level | 140db(THD≤1.0% at 1KHz) |
Weight | 342g |
Dimension | Φ47*156mm |
Standard List:
- KIMAFUN professional condenser PC recording microphone 1pc
- PC phantom electric potential · 1
- PC exclusive use, Dual core shielding audio input line: 2 pcs ( Ø 5 mm * 3m, female XLR +Ø 3.5 mm gold-plating plug and Ø 6mm *3m female and male XLR 1pc
- Windscreen 1pc
- Metallic holder 1pc
- User's manual 1pc
- warranty card 1pc
- Certificate 1pc
PC system configuration:
Lowest system configuration
CPU:Intel P4 1.6GHz or AMD same level CPU
internal storage : 512 M
graphics card : onboard graphics card
Sound card: onboard sound card, have mic input
network bandwidth : 512 K
Audiomonitor : common earphone
Recommend system configuration :
CPU: Intel Core 2 Duo 1.8 GHz or above AMD Athlon X2 64 2.4GHz
internal storage: above 1G
graphics card : memory size above 256 MB, support DirectX 9.0 , support Shader Model 3.0 or better.
Sound card :Individual sound card, support DirectX 9.0
network bandwidth : above 2 M
Audiomonitor : professional monitor earphone
Installation steps
1. Adjust the computer's voice to lowest
2. Connect the microphone and phantom power rightly, and connect the female XLP to microphone, pay attention aim at the pocket ,then push in the XLR plug till heard the "da" voice. When extract the XLR plug, it must press the key on the XLR plug, please don't pull it by force.
3. Connect the other male XLR to the phantom power "INPUT" port, pay attention aim at the pocket ,then push in the XLR plug till heard the "da" voice.
4. Connect the phantom electric potentials to the sound card of PC, and connect the female XLR plug to phantom electric potentials, insert the Ø3.5mm microphone plug to the mic pocket of sound card .
5. Connect the adaptor of phantom power to the phantom electric potentials with power socket.
6. Turn on the power switch of phantom electric potentials.
7. Adjust to proper volume for the PC
8.Complete the connection , then you can singing whatever you want.
Connection Diagram :